Have your cake and eat it too with the Salt Creek SL series of tents. Featuring three doors(!) that offer double side doors with double vestibule storage plus one head-entry door with an awning-style entrance, this tent can do it all and then some all the while hitting the mark for a full-featured backpacking tent. Steep walls create ample shoulder space while the 3D bin pocket uses up dead space above the feet to create generous storage inside the tent.
Specs + Sizing
Trail Weight |
4lb 11oz / 2.13kg |
Packed Weight |
5lb 2oz / 2.32kg |
Fast Fly Weight |
3lb 11oz / 1.67kg |
Packed Size |
21.5" x 7" / 55 x 18cm |
Floor Area |
42ft² / 3.90m² |
Head Height |
47" / 119cm |
Vestibule Area |
9ft² / 9ft² / 0.84m² / 0.84m² |
Footprint Weight |
11oz / 312g |
Number of Seasons |
3 |
Number of Doors |
3 |
Features
- A full-featured tent designed with three doors--two side doors with vestibules, and one head-entry door with awning--and over-vertical side walls for maximum head and shoulder room, make this one of our most diverse backpacking tents
- Front entry drop-down door with awning-style vestibule creates extra venting on hot summer nights, an additional escape route, or extra storage space for pets and gear
- Four-way DAC hub creates vertical walls for increased living space
- Two dual-zipper side doors and two vestibules with storm flaps on the vestibule zippers
- Dual-zipper door is smooth closing and allows for easy entry. Use only one zipper for quick reach-through access.
- Quick Stash door keeper on tent body door makes stowing unzipped door quick and easy
- Media pockets enable clean earbud-cord routing from phones or other devices
- 3-D bin pocket utilizes dead space above feet for ample storage space
- One fly vent for increased airflow and reduced condensation
- Low Vent feature on the vestibule doors for more air flow while still providing vestibule coverage
- Ready to pitch; with pre-cut guylines and tensioners attached to fly
- Reflective guylines and webbing on tent corners
- Multiple interior loops for attaching gear lofts, accessories and mtnGLO® Tent & Camp Lights
- To extend the life of your tent floor we recommend using a Big Agnes footprint - sold separately
Construction + Materials
- Fly and floor are polyester rip-stop with 1500mm waterproof polyurethane coating
- Tent body is breathable polyester rip-stop and polyester mesh
- All seams taped with waterproof, solvent-free polyurethane tape (No PVC or VOC's)
- DAC Pressfit pole system
- Ultralight plastic clips attach tent body to pole frame
- 2 interior mesh pockets, 1 mesh ceiling , 1 3-D bin pocket, 8 lightweight aluminum hook stakes & 2 awning guylines
- Gear loft loops included
- Fits Large Trapazoid, Trapezoid, Square and Triangle Gear Lofts - sold separately
- 4-way high-volume hub pole design